Hanse Haus Case Study

Close Button
  • Next
  • Prev
  • smart home heating
  • smart home heating
  • smart home heating
  • smart home heating fittings
  • smart home heating
  • Hanse Haus Case Study

    JG Speedfit UFH is in the Haus

Hanse Haus Case Study

JG Speedfit UFH is in the Haus


Hanse Haus 1Hanse Haus 2Hanse Haus 3

Oddington, Gloucester

Located in the picturesque valleys of rural Oddington, the new Hanse Haus is a remarkable piece of contemporary architecture. Equipped with JG Speedfit underfloor heating, the development holds truly outstanding energy-saving properties.

The Oddington Project

 Designed by Hanse Haus Ltd, the new-build Oddington dwelling is defined by its high sustainability credentials and great aesthetic value.

The house is a four-bedroom, two-storey building with total quadrature of 235.94m2. Given the size of the property, choosing the right heating system is of crucial importance for ensuring efficiency.

The main source of heat for the Oddington Hanse Haus is a ground-based heat pump, which as a concept is gradually proving to be the renewable technology of the future. The system is using a vapour compression cycle, where pumps take low-grade warmth and concentrate it to a higher temperature that is then used to heat up the building.

Due to the low temperature flow at which the heat pump operates, UFH is the ideal technology for distributing warmth throughout the house. 

JG Speedfit’s involvement

Being the sole plumbing and heating contractor of Hanse Haus for the UK, Synergy PHR has appointed JG Speedfit as the exclusive supplier of the underfloor heating system installed.

Darren Farley, director of Synergy PHR commented – “Since partnering with Hanse Haus in May 2012 Synergy have carried out installations in seven properties in the UK all with full ground and first floor UFH by JG Speedfit. We have used both staple and over fit systems that proved to be very easy to install, saving time and effort. The cooperation with the push-fit people was very satisfying from the initial contact with their sales representative, through to CAD specification, delivery and installation. On completion, the JG Speedfit engineers and technical support were always there to help with system setup, testing and control.”

JG Speedfit offered Synergy PHR comprehensive after-sales support, assisting throughout all project stages with a particular focus on pipe layout design and installation advice.

Darren continued – “Synergy currently have seven new jobs to complete with JG Speedfit in 2013 covering the UK, Scotland and the Channel Islands. I am looking forward to these and more successful projects in collaboration with Speedfit, using their superb products and services!”

The advantages of the JG Speedfit UFH system

The technology behind the JG Speedfit UFH model is similar to the philosophy behind the Hanse Haus concept – innovation towards energy preservation and efficiency, comfort, aesthetics and value for money.








Upper Oddington, Gloucester


Hanse Haus

Tech Support:

Andy George, JG Speedfit

Project Type:

New Build

Project Size: