Top

Mounting Rail System

Close Button

 

Mounting Rail is an ideal solution when the insulation is too thin for staples. Using the screed as a heat diffuser, 15mm JG Layflat® pipe is secured to ‘Clip Rails’ on top of rigid insulation sheets, which are placed over the concrete subfloor.

Key benefits 

Project suitability

A variety of BS 8204 approved screeds can be used and are typically 65-75mm thick for sand-cement types or 40-50mm for liquid pumped screeds. Screed should be laid as soon as possible after the pressure test and should be left under pressure test during the screeding process. The floor finish can be laid when the screed is fully cured.

More info

Find out more product and technical information as well as installation advice.

view-products